Finnlife Log Cabins UK

Luxury Log Cabins from Finnforest

So, cabin-desirer - you've made it here, and now you're just a couple of steps away from log cabin for you! If you're looking to buy and build your very own Finnlife Log Cabin then this site has everything you need. Read specifications and view images of finn life log cabins from the small and beautiful Finnlife Jarvi, the great all-rounder Finnlife Mokki to the mega Finnlife Helsinki, and compare prices from the leading retailers. Don't Wait! Click your favourite image below and Compare Now!

5m/sq to 10m/sq Finnlife Log Cabins - Compare Prices!

A full range of Finnlife Log Cabins is available through selected retailers!

     

   

10m/sq to 20m/sq Finnlife Log Cabins - Compare Prices!

     

     

     

 

20m/sq+ Finnlife Log Cabins - Compare Prices!

     

     

     

Construct your Finnlife Log Cabin

Fantastic, lazy summery evenings may be calling, but don’t rush to construct your Finnlife Log Cabin. Take the time to get to know how it is put together, and you will savour many years of trouble-free pleasure. No carpentry abilities are required. Everyone can erect a Finnlife Log Cabin, although some jobs may need more than one pair of hands. Build times will change depending on your skills and the number of people helping. Obviously you don’t have to do it without any help!

You might present this document to a handyman then sit back until he delivers the keys to your finished Finn Life Cabin. However, no matter who completes the work, the initial step is to read carefully these instructions. The plan is to be methodical and to plan ahead. Although Finnlife log cabins share many features in common, each model style is unique. This set of general instructions cover the basics of log cabin construction and apply to all Finn Forest cabins.

For features that are unique to your Finn Life Log Cabin – such as dimensions, piece numbers, building plans and piece lists – you should refer to the separate Building Plans and Parts List. If you are building cabins Finn Life Helppo, Finn Life Helsinki, Finn Life Joki, Finn Life Kesa, Finnlife Pori, Finn Life Seita and Finn Life Valo
be aware that certain instructions may be different a slight amount from those found here.

Gravel option: Remove all organic debris before you start work on the foundations. Foundations must always be laid bigger than the base of your Finnlife Log Cabin – 300mm wider in each direction and 6” thick when using compressed type gravel. For compressed gravel foundations you should use retaining boards to keep the gravel in place and compressed.

Before you begin to build you should make sure that you have a full set of pieces. Tick off every piece against the piece list in the Building Plans and Parts List as you remove it from the transit packaging. In the unlikely event that there is a missing piece or that a piece has been broken in transit get in touch with the distributor, stating the Finnlife Cabin reference number displayed on the packing label of the transit packaging. As you check each piece place them out on the ground around the site of the log cabin. Lay every piece near to where it will be utilized. Laying out helps you visualize how the Finn Life Log Cabin is built and it means that pieces are available to hand when you need them. You can use the Building Plans and Parts List as a scheme to what goes where. Be careful not to place pieces too close to the Finn Life Log Cabin footprint. Give yourself sufficient room to work in.

Place out the four sides of the door frame on a dirt-free and level surface so that the doors open outwards. Loosely arrange them to match the ready frame. The top and bottom jambs are not quite identical. Place the one with the Lock RECESS AT THE TOP AND BOTTOM. Ensure that the door cills go behind the doors. Put the joints together loosely and make sure THAT YOU CAN STILL OPEN THE DOORS prior to moving on.


Note again that if your Finn Life Log Cabin includes partitioning walls, also Place the full-height wall boards that form the bottom layer. Refer to the Building Plans and Parts List for assistance. Pay particular attention to the location of any notches in the wall boards of multi-roomed cabins. The position of these notches shows where the interlocking walls go.

Screw one end (5mm Dia x 100mm length wood screw) only of one half-height wallboard to the underlying outermost floor beam by driving a screw (supplied) through the base of the corner joint. Leave the other three corners free. If needed, make adjustments to the internal floor beams to keep an even spacing between them. Screw the half-height wall boards (5mm Dia x 100mm length wood screws) to the rest of the floor beams. 10.5 Check that the structure is square by cross-examining the lengths of the cross-diagonals. If necessary, you can adjust by pivoting the four linked wall boards on the one corner that you have already screwed down. Momentarily lift the full-height wall boards so that you can affix screws into the three remaining corner joints into the outermost floor beams.

Begin laying the second layer of wall boards. Bear in mind that the wall that houses the door will consist of two separate wall boards with a door-width gap between. To ensure a smooth fit, you should tap each level down on to the layer below. Do not hammer wall boards directly. Use the provided assembly piece (a short length of wall board with a matching joint on the lower surface) to take the blows. In the event that you have not received an assembly piece then any scrap piece of timber will offer adequate protection for the tongues. Do not hammer too hard.

Persist with laying wall boards according to the layout of the Building Plans and Parts List you will have received with your order. The ending few layers of side wall boards in some Finnlife Log Cabin are longer. The lengths increase in steps to offer support to an overhanging canopy. Place angled gable boards sequentially beginning with the longest. Be careful with the alignment of the angled gable boards. The sloped roof line should be symmetrical and even at both gable ends. Use nails at either end to fix each layer of gable boards to the layer below. Hammer nails in at an angle through the sloped ends of the gable boards.

Constructing the gable ends shows a succession of slots for the roof beams. As every slot appears, tap in a roof beam. Ensure that the angled side of each roof beam lies flush with the angle of the gable. Nail through into the gable boards to fasten. Tap the ridge beam into place at the apex of the gable ends. Fasten by nailing into the uppermost gable board. Slide ridge and roof beam extension pieces over the exposed ends of the beams at both ends of the cabin. Make sure that the upper surfaces of the beams and the extension pieces are flush, then fasten by nailing from either side. Fix the wall board extension pieces to the ends of the topmost wall boards in the same way.

Roofing shingles are rectangular. The bottom half of the face side is a decorative green with slits that split it into three flaps; the top half is black and coated with bitumen. With the exception of the first row, all shingles are laid with the green flaps at the bottom. Ridge shingles are fashioned by cutting individual roof shingles into thirds. Place roof shingles when the temperature is above 5°C. We suggest that you use a bitumen shingle adhesive on the underneath of the tiles. This would be an extra measure to ensure longevity of the shingle life.

Place the first row of shingles with the green/black face uppermost and the green flaps at the top. Place the first shingle so that one side aligns with the right-hand edge of the roof and the black bitumen overhangs the eaves fascia board. Adjust until the edge of the black bitumen extends about 10mm out from the edge of the eaves fascia board.The 10mm overhang is known as the 'water drop edge'. Fasten the shingle with four clout nails driven through the bitumen patches on the shingle into the roof boards. End the row by laying more shingles edge-to-edge until the complete length of the eaves is covered. Trim the excess from the left-hand end of the roof. Keep cut pieces for later use.

Begin the second row from the left-hand end. Place this row (and all subsequent rows) with the green/black face uppermost and the green flaps at the bottom. Align the second row of shingles so that the bottom edge of the green flaps are just proud of the roof edge. fasten with four clout nails driven through the lower green part. Locate these nails just below the line that separates black bitumen from decorative green. Properly located nails will be obscured by subsequent layers of shingles. Trim the ending shingle to fit. Keep cut pieces for later use. Place the first shingle in row three so that the middle of the left-hand flap aligns with the edge of the roof. Adjust its height until the tips of the decorative flaps align with the tops of the slits between the flaps in the row below.

Nail down the shingle. From now on each row has to be parallel with the row below to make an even pattern. Start each row from the left hand end of the roof. In each case the first shingle in the row must be offset to the left by half a flap, that is by 16 of its total length. That means that the centre of the flaps of the current row will align with the gaps between the flaps in the row below. Continue laying shingle sheets from left to right, edge-to-edge, to complete a full row.cut off the excess from both ends and retain cut pieces for later use. Continue putting rows of shingles from left to right, giving each row an extra half-flap offset to the left. If available, use the cut off pieces you have already saved as the first or ending shingles in the row. When you reach the final row, the upper edge of the shingles will extend beyond the roof ridge. Bend the extra over the ridge and nail it down. Cut several roof shingles into thirds to make ridge shingles. Cut them by extending the slits between the flaps right through the bitumen layer. You can do the same with other trimmed pieces left over from lower rows. To complete each ridge shingle you should taper the half containing the black bitumen. BeginStart the taper at the point where the original slit ended. Finish it at the furthest edge of the black bitumen. Take the taper in about 10mm at either side of the bitumen.



Return to top

A Carpentry Glossary

Glossary of terms
Carpentry Terminology

Architrave - A moulding used to surround a door, window, arch or wooden panelling, or the lowest horizontal moulding of a classical entablature.

Bay window - A window that extends out from the wall of a room, often to floor level giving additional internal floor area.

Beading - A narrow strip of wood with a half round profile used as an ornamental edging.

Bolster chisel - A broad-bladed chisel, normally completely made of steel) used mainly for masonry work but useful for lifting floorboards etc. .

Brace - A diagonal member used to prevent part of a structure from sagging - can either be temporary or permanent.

Cantilever - A projecting beam (or other part of a structure) that is secured at one end only.

Casement window - A window that has vertically and/or horizontally hinged openings and may include non-opening sections of glazing.

Caulking - Sealing joints by applying a flexible compound or sealant.

Chair rail - Another term for dado rail.

Chalk line - A length of string, coated in chalk dust, which is used to produce accurate straight lines for many decorating tasks. The line is held at both ends and 'twanged' against a surface thus transferring chalk dust to it.

Chipboard - A manufactured building board made from compressed and glued wooden particles.

Counter-bore - To insert a suitable screw into a surface so that its head does not protrude above that surface. This is achieved by using screws in a hole 'counterbored' with a flat bottomed cutter. If the counterbore is deep enough, it may be plugged with a piece of doweling to fully hide the screw head.

Counter-sink - To insert a suitable screw into a surface so that its head does not protrude above that surface. This is achieved by using counter sink screws in a hole 'countersunk' with a conical-shaped cutter.

Cross grain - Wood grain that is not inline with the main axis of a length of timber.

Dado - Decorative and/or protective panelling on the lower part of an interior wall. AKA Wainscot.

Dado rail - A moulding attached along a wall, about 1 metre (3ft 4in) from the floor, separating the upper and lower areas of the wall. Originally intended to protect the wall from damage by chair backs. AKA Chair Rail.

Dormer window - The window in the vertical end of a dormer.

Dovetail nailing - Nails driven through one piece of wood at opposing angles into another piece thus making it difficult for the timbers to be pulled apart.

Dowel - A short length of wood, round in section, used for a variety of purposes such as joining timbers, plugging fixing holes etc.

Drip groove - A groove cut in the underside of a projection (such as a window sash or sill) to cause rainwater to drip to the ground rather than running under the projection onto the main structure.

End grain - The surface of wood exposed after cutting across the fibres.

Escutcheon - In door furniture, the ornamental and protective plate around the keyhole.

Fanlight - The glazed light above a door, often fan-shaped and ornamented - however the term is applied to any shape of light above a door.

Feather-edged boarding - Plain weatherboard tapering in thickness; the thick edge overlaps the thin edge of the adjacent board - the fixing should go in the thick edge missing the edge of the board underneath. When hung horizontally, the thick edge goes downwards, when used vertically for fencing etc, the thick edge should be away from the prevailing winds.

Fibreboard - A lightweight manufactured board material with little strength, can be used in ceilings or as insulation to attics.

Fielded panel - A wall or door panel with a raised centre area which is sloped off, bevelled or 'fielded' towards the edges.

Finial - A turned or carved ornament usually in the shape of an urn, ball, bun, spike or figure, often used to decorate the ends of staircase newel posts.

Firrings - Pieces of tapered timber fixed to the top of joists to adjust their slope. Can be used under rook decking to give a drainage fall or to bring a sloping surface level.

Fish plate - Steel plates used to join two pieces of timber end to end - the plates (one on each side) overlap both pieces and are secured using bolts through.

Flush door - Doors which have plain, smooth sides - either constructed with a solid or honeycombed core, surfaced with plywood or other laminate on each side.

Fluting - Parallel concave channels used to decorate the surfaces of stone, plaster or timber etc.

French windows - A pair of narrow casement windows that extend to floor level forming a doorway to the garden or other outside area. Traditionally they opened inwards (as traditionally do windows in France), but modern ones may vary.

Glazing bars - The framing members in a window sash which divide and contain the individual glass panes.

Halved joint - Many variation exist; but the principle is that half of each piece of timber is cut away and the remaining halves are fitted over each other.

Hardboard - A thin manufactured board made from compressed wooden particles - one side smooth, the other side rough, Used for covering subfloors etc.

I Beams - Manufactured joists comprising a thin vertical of manufactured board with wider timber fixed along the upper and lower edges. Provide increased loads over wider spans than can often be achieved using solid timbers.

Jamb - The vertical side part of a doorway or window frame.

Medium-density fibreboard (MDF) - A manufactured building board of compressed wooden fibres and used for a variety of interior joinery and building tasks. The dust is harmful and a mask should be used when cutting or drilling.

Mitre - A joint where the two parts are each cut at 45 degrees so that the make a neat rightangle.

Parquet flooring - A flooring traditionally made up of small wooden blocks arranged in a herring-bone or other geometrical pattern. Modern alternatives consist of thinner wooden panels which give the same effect.

Picture rail - A moulding positioned along a wall a short distance down from the ceiling, special hooks are then used to hook onto the rail to support pictures and other wall decorations. The wallpaper would often stop at the underside of the rail and area above would be painted. Were fashionable years ago, not so much now except in rooms with very high ceilings.

Picture window - A window comprising of a large, single pane or double/triple glazed unit.

Plywood - A manufactured building board consisting of a number of layers of wood veneer stuck together in such a way that the grain of one layer is at right angles to that of the previous layer. Various qualities of face veneer, thicknesses, number of layers etc are available to suit numerous applications

Rail - A horizontal or vertical strut used to make up a panelled door or window frame.

Rebate - An area of a window glazing bar recessed to take a pane of glass.

Sash window - A window consisting of two main frames that slide vertically past each other - each sash being counter balanced by a sash weight on a sash cord.

Spirit Level - A tool used to establish true vertical and horizontal lines by looking at a bubble in spirit filled vials.

Stile - The vertical member on each side of a framed door or window sash.

Straight grain - Grain (wood fibres) that aligns with the main axis of a length of timber.

Straightedge - A length of timber or metal with at least one edge truly straight for marking out, checking levels etc.

Stud wall - An internal, non-load bearing wall faced with lath and plaster or plasterboard. Often timber framed although metal frames are being introduced into domestic building - they have been used for many years in industrial ones.

Studs - The vertical wooden posts within a timber-frame wall.

Subfloor - The surface beneath a floor covering, usually of concrete or timber, and sometimes covered with hard board.

Suspended timber floors - The joists supporting the floor boards or chipboard are themselves supported by small "sleeper" walls at ground floor level or wall hangers at other floors. Older properties may have the joists built into the masonry walls which can lead to the ends of the joists rotting.

Timber frame - A method of building construction where the internal walls, floors, roof etc are manufactured in sections using timber off site and are erected onto a completed base built up from the foundations. In modern timber framed buildings, the inner timber construction is often covered by using an outer skin of brick or similar materials to give a traditional appearance.

Timber framed wall - A wall composed of structural wooden components, sheathed on both sides or infilled with masonry or wattle and daub.

Tongue and groove - A system of interlocking planks along the sides to produce a panelled surface.

Wainscot - Wood panelling or boarding on the lower part of an internal wall. AKA Dado.

Wood-block flooring - A type of wooden sheet flooring consisting of small blocks such as Parquet.

FROM: DIYData.com

Finnlife Models

finnlife jarvi | finnlife lampi | finnlife hytti | finnlife seita | finnlife kesa | finnlfe puro | finnlife valo | finnlife kulma | finnlife mirva | finnlife mokki | finnlife peile | finnlife reikko | finnlife susi | finnlife talo | finnlife helppo | finnlife helsinki | finnlife ikkuna | finnlife joki | finnlife koppelo | finnlife lovisa | finnlife pori | finnlife suoja | finnlife teeri | finnlife teos